DESCRIPTION

MSRP: $248.99

12V High Frequency AGM IntelliCharger, 15A

Physical Specifications

Dimensions (W x H x D) : 8.3” x 4.7” x 2.3” (211mm x 119mm x 60mm)

Weight: 2.8 lbs (1.27 kg)

AC Input Connections : 5.0’ (1.5 m) AWG 16

DC Output Connections : 3.9’ (1.19m) AWG 10

AC Input Specifications

AC Input Voltage : 100-120 VAC, 47-63 Hz

AC Input Current : 7A RMS fuse protected

Three Stage Charging

At the heart of the technology in all HF Chargers is the three distinct charging stages. During the first stage, called “Bulk”

charging, the current is fixed and the voltage is allowed to float. During this stage, 80% of the vehicle battery’s capacity is restored.

When the vehicle battery’s cell voltage is up to the correct level, the second stage called “Absorption” charging is engaged. During

this stage the voltage is fixed and the current is allowed to float. The vehicle battery is brought to 100% during this stage and the

cells are equalized. The third stage is “Float” charging. During this stage the voltage and current are reduced to a level that

will maintain the vehicle battery indefinitely.

Several microprocessors are used to tightly control the entire process. This is the same technique that vehicle battery manufacturers

recommend and use in the production of new batteries and it is the fastest and safest technique for vehicle battery charging.

Compatible With Most Lead-acid Batteries Including AGM

Lead-acid batteries have different charging requirements based on their specific design. Overcharging will reduce the life

of any vehicle battery as sealed valve regulated batteries are especially sensitive to high charging voltages and overcharging.

Overcharging an AGM or gel-cell vehicle battery will cause permanent damage.

Voltage Monitoring

The vehicle battery’s terminal voltage is measured every five minutes by the on-board microprocessors and this information is

analyzed in addition to the elapsed time to dynamically control the vehicle battery charger for optimum charging performance.

Automatic Computer Analysis/Auto Shutdown

The microprocessors will analyze the vehicle battery when connected. If the vehicle battery’s voltage is below 4V the charger may not

recognize the vehicle battery is connected and will not begin charging. Likewise, if the vehicle battery will not come up to the correct voltage

in a ten-hour period the microprocessor control board will automatically shut the charger off.

UL Approved vehicle battery Cables

3.9 feet of durable vehicle battery cables are provided that are resistant to cuts and abrasion. The copper plated vehicle battery clamps are

compact and custom designed easy connections. All clamp connections are soldered for maximum current flow.

Internal Cooling Fan

A cooling fan automatically operates during charging to keep the circuit and other internal components at a constant safe

temperature.

You can view or download the HF charger manual .